![]() If this is impractical, however, it is possible to install on top of existing tiles, so long as they are securely fixed and in a good state of repair. On existing tilesįor best results with our vinyl flooring we recommend removing all existing floorcoverings. If your wooden subfloor is particularly uneven, apply a layer of self-levelling underlayment before the Feather Finish.įlooring grade chipboard may be used instead of ply if there is no movement between boards and extra care is taken in smoothing the surface. We recommend the use of an appropriate smoothing compound such as Ardex Feather Finish to level out depressions and fill gaps between boards. Panels should be acclimatised to the site conditions before fixing as recommended by the supplier. All fixings should be countersunk and finished flush with the surface. ![]() Wood should be fixed using screws, twisted shank or ring shank nails, serrated or divergent staples. Ply should be of suitable quality, eg SP101. Cover the floor area with either a 4mm or 6mm plywood - the thickness selected should be determined by the quality of the surface being covered. If you are laying on wood, for best results we recommend you remove all existing floor coverings, secure all loose boards and hammer down any protruding nails. The total build-up of the floor is approximately 3mm of latex self-levelling compound, a negligible skim of Ardex F eather F inish and 1mm of adhesive. For all subfloors, we recommend a final skim of Ardex Feather Finish to ensure the smoothest possible finish. If your sub floor is uneven we recommend you use a good-quality latex self-levelling compound, alternatively smaller uneven spots of more than 3mm can be filled with a rapid-drying deep-fill compound. There is no need to use an underlay with our vinyl flooring. Obviously the cleaner and smoother you sub-floor, the better your vinyl flooring will look. Ensure there are no cracks or gaps and that it is free of dust, grease, wax, paint and any other dirt, stains or contaminants. Make sure the floor on to which your vinyl is being laid is smooth, flat and rigid. Therefore, it is essential that all the material required for each installation is ordered in one batch to ensure a perfect colour match between rolls. As with all vinyl flooring, there are small variations in colour between manufacturing batches. Before cutting or installing your vinyl flooring, inspect it to ensure there are no visible defects and that all rolls are the colour and size you want, as we can't take items back once they have been used or fitted (see Conditions of Use and Sale). It is recommended that prior to laying, both floor and adhesive should be kept in a temperature of 18C or more, never less than 15C. This will allow your flooring to acclimatize to the temperature and condition of its new home. On delivery of your vinyl flooring, please remove it from its packaging and store it loosely rolled and set upright in the room that it is due to be laid in for at least 24 hours before installation. Check if the subfloor and site conditions are in accordance with the specifications described within these instructions. Vinyl flooring can be installed in almost all domestic and commercial areas, except in saunas, wetrooms and other permanently wet areas. These floors are suitable for indoor use only. Users are advised to conduct their own tests for a particular application. The company cannot accept any responsibility for loss or damage that may result from the use of this information, due to the possibility of variations of processing or working conditions and/or workmanship beyond our control. It is given only for the guidance of our customers and for use with our recommended tools/adhesives. Every endeavour has been made to ensure the information given here is true and reliable. See the Conditions of Use page for more details.īelow are guidelines for laying our vinyl flooring. We have a list of fitters who have done a lot of work for our customers and who we have found to be reliable – though please note these are independent tradespeople and as such we cannot take responsibility for their work or any arrangement you make with them. (No underlay required!) If you are looking for an experienced fitter, we can help – just email us your postcode. Pure-coloured vinyl flooring looks best when laid on a beautifully smooth sub-floor, which is easily achieved with the right preparation work.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |